Supra Sword Combicon Speaker Cables

Sword 2×3.0 Combicon
The base of Supra Sword’s superior performance is the bifilar-wound litz conductors comprising 24 indi- vidually insulated strands per pole, 12 wound in one direction, the remaining 12 in the opposite, resulting in magnetic field cancellation and very low inductance. Further, the litz wound and individually insulated strands cancels the dynamic skin-effect. The Sword behaves as a non-inductive and in-phase cable through the entire audible frequency spectra. The only thing not cancelled is the sound, allowing you to hear every little note of the music, at full dynamics. Sword will maintain the true signal put out from your Hi-Fi sys- tem, giving a completely transparent transition from amplifier to speaker. You will hear the music, nothing more, nothing less.

Sword comes with crimped M6 threaded adaptors and a set of connectors with corresponding threads. The pictures show spades and banana/BFA connectors, as well as the spade replaced with banana/BFA directly screwed onto the body. The connector body and wire are crimped together
under at high pressure, making a perfect, air tight, joint.

CONSTRUCTION Cable:
Conductors (x2) Area:

Jacket: Diameter: Colour: Markning: Configuration: Connectors:

– Material:
– Connection:
– Insulation: Signal direction: Packing:

Sword 2×3.0
2x12x0.40 (Enameled)
2×3.0mm2 / AWG 12
PVC GA78, 8-model
20×9 mm
Iceblue
SUPRA SWORD 2×3.0 > Made in Sweden > Meter mark Stereo pair, 2 > 2 connectors, Right = red, left = black Combicon, 8 x Banana M6 pins & 8 x spade M6 are included 24K gold plated OFC Copper
Crimp, 8 x Combicon CB03 M6
Sleeve 4 x S9 red, 4 x S9 black
Follow the arrows > amplifier > Speaker
Carton 31x30x7 cm