NAD C338 Integrated Amplifier
$749.00
The C 338 adds big sound to your favourite music sources and brings incredible flexibility to any stereo system. With Spotify Connect®, Bluetooth®, and the first-ever hi-fi amplifier to have built-in Chromecast®, the C 338 allows you to stream and cast music directly from any music streaming app, letting you enjoy your music wirelessly. Add a turntable using the phono input and experience the warmth of vinyl collections with the room-filling sound of NAD’s HybridDigital™ amp technology. Power, volume, source selection, and device settings are all controlled using the intuitive interface of the NAD Remote App for iOS and Android.
Getting the Basics Right
Built with NAD’s renowned music-first approach to audio architecture and amp design, the C 338 is equipped with the most advanced components commonly found in NAD’s class-leading line of amplifiers. Always starting with the details you can hear and advancing from there, NAD develops low-noise circuitry with the precision and stability to deliver incredible, near-zero distortion sound for the most difficult speakers.
HybridDigital™ Amp Technology
The search for a high-performance Class D solution led NAD to HybridDigital™, an innovative amplifier technology that uses a variable modulation frequency to bring out the life-like qualities of music, while reducing distortion under every operating condition. This highly optimized design gives phenomenal performance to the C 338 amplifier, both measured and subjective.
Efficient Class D Power
NAD has worked tirelessly to create the best performing Class D amplifiers that are energy efficient and produce beautiful sound—not heat—regardless of basic design principles. Using advanced measurements and data, NAD developed the C 338’s highly efficient power supply with a customised Hypex® UCD output stage to pump out 50 watts continuously and over 200 watts instantaneously to meet the demands of the most dynamic music. This new design is very linear over a wide bandwidth and provides consistent, noise-free performance for the amplifying stages with near perfect regulation of voltage.
Always Ready for Streaming
The C 338 has Chromecast built-in so you can cast music, tunes, podcasts, and playlists from your favourite apps on your phone, tablet or laptop to your stereo system. Spotify Connect® lets you discover millions of songs and stream them directly to your C 338 using the Spotify® app for a rich, wireless music experience. With the added flexibility of Bluetooth®, your music streaming possibilities are truly limitless with the C 338.
Built-in Phono Stage for Vinyl Listening
Using a MM phono stage and an innovative low-noise circuit path, the C 338 can reproduce the warmth of LPs with accurate RIAA equalization and control the infrasonic noise that is in all recordings, without ever affecting the bass response.
Flexible Connectivity
With a wide array of connections, including a separate headphone amplifier that can drive high-impedance studio monitor headphones, the C 338 is ready for any type of listening. Line inputs can accommodate all kinds of analogue source components, offering ideal input impedance with linear ultra-low noise buffer amplifiers to preserve the musicality of recordings. Also connect a subwoofer with low impedance line outputs and extend the versatility of this budget-friendly, do-it-all amplifier. Key Features 50W x 2 Continuous Power into 8 or 4 Ohms90W / 150W / 200W IHF Dynamic Power into 8 / 4 / 2 OhmsFirst hi-fi amplifier to feature Chromecast built-inIntegrated Bluetooth® for added music streaming flexibilityBuilt-in Phono Preamp for TurntablesStereo Line, Optical Digital and Coax Digital inputsNAD Remote App support for tablet and smartphoneDedicated Headphone AmplifierSubwoofer Output Preamplifier Line In, Subwoofer Out THD (20Hz-20kHz)<0.005% at 2V outSignal/Noise Ratio>106dB (IHF; A-weighted, 500mV out, unity gain)Input Impedance (R and C)56 kilohm + 100pFMaximum Input Signal>4.5Vrms (ref. 0.1% THD)Output ImpedanceSource Z + 200 OhmInput Sensitivity50mV (100Hz ref. 500mV out, Volume maximumMaximum voltage output – IHF load>4.5V (ref. 0.1% THD) Line In, Headphone Out THD (20Hz-20kHz)<0.005% at 1V outSignal/Noise Ratio>105dB (IHF; A-weighted, 32 Ohm loads, ref. 2V out, unity gain)Frequency Response±0.3dB (20Hz-20kHz)Channel Separation>56dB at 1kHzOutput Impedance0.5 Ohm General Specifications Line In, Speaker Out Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)>50W (at rated THD, 20-20kHz, both channels driven)IHF Dynamic Power8 Ohm 80W 4 Ohm 150W 2 Ohm 210WTHD (20Hz-20kHz)<0.03% (250mW to 50W, 8 Ohm and 4 OhmSignal/Noise Ratio>98dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)Clipping power>60W (at 1kHz 0.1% THD)Peak output current>18A (in 1 Ohm, 1 ms)Damping Factor>300 (ref. 8 Ohm, 20Hz to 6.5kHz)Frequency Response±0.3 dB (20Hz-20kHz)Channel Separation1kHz >75dB 10kHz >65dBInput Sensitivity (For 50W in 8 Ohm)Line In: 380mV, Digital In: 18% FSSample RateUp to 24 bit/192kHz Phono In, Speaker Out THD (20Hz-20kHz) (Stereo)<0.3% at 50W outSignal/Noise Ratio>82dB (200 Ohm source, A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF A-weighted, ref. 500mV out)Input Sensitivity4.1mV (ref. 50W 1kHz 4 Ohm out, Volume maximum)Frequency Response±0.3dB (20Hz-20kHz)Input Impedance47 kilohm + 100pFMaximum Input Signal>80mVrms (ref. 0.1% THD) Power Consumption at ECO Standby mode 0.4 Watts*at Control Standby mode1.8 Watts**OFF mode (Power switched OFF)0 Watts * – After 20 minutes of no user interface interaction and no active source input ** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input NOTE: Bluetooth connectivity can be enabled or disabled via press and hold of PLAY button of AMP 3 remote control Weight & Dimensions Gross Dimensions (W x H x D)*435 x 70 x 285mm (17 1/8 x 2 13/16 x 11 1/4)”Net Weight4.85kg (10.7lb)Shipping Weight5.85kg (12.9lb) *Gross dimensions include feet, extended buttons and rear panel terminals
